APPLICATION:
Domestic and light industrial wiring, where
smoke and acid gas emission would pose a major
hazard in the event of fire. Can be clipped
to surface, on trays or in free air where there
is little risk of mechanical damage. Suitable
for laying into trunking or conduit etc. when
mechanical protection is required. May be embedded
in plaster or laid in walls.
CONSTRUCTION:
Two or three core flat cables with an additional
uninsulated copper circuit protective conductor.
Solid or stranded plain copper conductors. XLPE
insulated, laid parallel with CPC and Zero Halogen
Low Smoke (OHLS®) sheathed.
CORE COLOURS:
Two core: Brown and Blue.
Three core: Brown, Black and Grey.
SHEATH
COLOUR: White
BASEC:
Certified
MAXIMUM
CONDUCTOR TEMPERATURE: 90ºC
Note: Where a conductor operates at a temperature
exceeding 70ºC it shall be ascertained that
the equipment connected to the conductor is
suitable for the conductor operating temperature
(see regulation 512-1-2 of BS7671, the 17th Edition
of IEE Wiring Regulations)
CURRENT
RATING: Refer to table 4D5A in BS7671
FIRE PERFORMANCE
CHARACTERISTICS:
Smoke emission: IEC 61034 , BS EN 50268
Acid gas emission: IEC 60754-2, BS EN 50267-2
Flame propagation: IEC 60332-1, BS EN 50265
*
Stranded Class 2 cpc
Download the individual data sheet for 624BH premium fire safety wiring cable
Download Cables Brochure to see the whole range of wiring cables by Draka
Find your local stockist now...
Please enter your details below and we will call you as soon as possible with details of your nearest stockist
